Make the edge loss at least: excise the edge do slurry fabric at the entrance. What's more. chear the cut edge by suction blower. As the below wheel and knife be designed as tilted that can cut in the top end and reduce the loss to the greatest degree.
The cutter connected by a spring is driven by the motor and close to the under knife. Such as the scissors to adjust the cutter tight by spring. Maximum of 250N AND, and can extend the cutter life.
For the application of different fabrics. to adjust the position of BTA80 by DC motor. adjust the button by hand at the output of stereotypes fabric. choosing infrared electronic eye on the side and Controller to achieve the purpose of detected the same location automatically.
◆Roller chain which funs on maintenance-free Orbit with ully encapsulated bearings and long-lile lubrication for years
◆Minimum lubricant consumption by the direct lubrication system
◆Pin chain ,clip chain
◆Optionally depinning protection: locking clamp or protection bar
Width Adjustment Device
◆With the main instument operating desk, single or combinable movement controls each section adjustment device,setting requirements of any width
◆With the tall operating desk, single movement controls the final section width/ combinable movement controls the whole machine width
◆The insulation panel of the whole machine is made of 150 thick high density heat insulating material, it keeps the heat loss at the lowest state.
◆Careful sealing of all connection positions
◆The total height of the chamber is 1600mm, special disign for energy saving,lowest heat loss and meet all process requirements.
◆Air locks at the fabric entry and exit openings
The Environment Friendly Exhaust System
Adopt integrated design, with ittle space, but neat and beautiful. The through- type structure design, with low wind resistance and smooth exhaust. The temperature in the air duct is consistent with that in the chamber, effectively avoid oil drop, and equipped with insulation layer, ltte thermal radiation to the workshop. The air duct can be disassembled independently, and the cleaning and maintenance is convenient.
Independent Drive Of Main Chain
◆By control module, it is equpped as good quality frequency controlled-3-phase AC motors for absolutely synchronised operation
◆Derect frequency drive system to guantee the lowest amount of mantance and energy
◆Independent drive design, space saving, and heat dissipation